10 Best Adhesives for Car Phone Mounts [2025]
This post contains affiliate links. As an Amazon Associate, we earn from qualifying purchases.
Finding the best adhesives for car phone mounts is essential for ensuring your device stays secure while driving. With a variety of options available, choosing the right adhesive can enhance stability and ease of use. This guide will help you discover the top 10 adhesives for car phone mounts that are reliable and effective.
Top 10 Adhesives for Car Phone Mounts in the Market
Best Adhesives for Car Phone Mounts Review
Bestseller No. 1
AZXYI Very High Bond Sticky Adhesive, 6 Pack Dashboard Pad Mounting Disk...
- 【6Pcs Clear Adhesives Replacement】AZXYI offers 6 Pcs round clear sticky adhesive pads(Diameter: 80mm,3.15") for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
- 【Easy to Use】To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield.
- 【Cut into any size you need & Compatible With Suction Base】You can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market.
- 【Easy to Install - Step 1】Provided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly.
- 【Easy to Install - Step 2】After sticking the adhesive to the base, peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate. please wait 24 HOURS to use.
Bestseller No. 2
5pcs Sticky Adhesive Pads for Car Phone Mount, 70mm/ 2.76" Double-Sided Heavy...
- [DESIGNED FOR SUCTION CUP PHONE HOLDER MOUNTING BASE] 5pcs Genuine iQIHAN round double sided adhesive pads for suction cup mount base, can hold your car phone sucker mount more firmly on the dashboard or windshield. When your original adhesive loses stickiness, these non slip adhesive pads will be a good ideal as a replacement!
- [TRANSPARENT & HIGHLY ADHESIVE] Transparency is a highlight of this clear round heavy duty two-sided anti-skid adhesive pads. You can stick the clear adhesive on the suction cups without affecting the appearance of the suction cups. The adhesive is made of high quality acrylic material with high adhesion, waterproof and toughness, it can make your dashboard suction cup smartphone holder more fixed, and the adhesive tape will not lose stickiness.
- [WIDE APPLICATION - CUTTABLE] Self-adhesive mounting gel adhesives for dashboard suction cup phone mount! You can cut these flexible universal adhesives into smaller sizes or other shapes and use them for different sizes of dashboard magnetic phone mount, dashboard mounting disc, sat nav, gps navigation mount, car tablet mount, iPad tablet holder, outdoor camera car mount, vehicle decorations, wireless charger bases, backup camera screen, electronic products, monitors, toys, radar detector mounts, reversing cameras, action cameras, alarm sensors, vehicler recorders, ect.
- [Easy to Mount] Provided with rounded rectangular raised tabs, the protective film can be easily peeled off. When using, firstly clean the surface to make sure the surface is clean and dry. Secondly, peel off the yellow protective film from the adhesive and attach it to the suction cup holder base, and press repeatedly to ensure full contact between the adhesive and the suction cup base. Then, peel off the red protective film from the adhesive and stick the suction cup to the car dashboard and press repeatedly. Finally, wait 24 hours to use.
- [PRODUCT INCLUDES] 1) 5pcs round transparent 2-sided rubber adhesive pads for mounting dashboard suction cup cell phone holder (Diameter: 70 mm / 2.76 inches). 2) 5 pcs cleaning bags for cleaning the mounting surfaces before use. 3) If you encounter any problems before, during or after use, please feel free to contact us and we will solve the problem for you!
SaleBestseller No. 3
APPS2Car 3M Vhb Sticky Adhesive Pads Replacement Mounting Tape 4 Pcs, Dashboard...
- Important Tips for Best Use: For effective adhesion, do not apply the 3M VHB pad on soft, uneven, textured, greasy, or leather surfaces. Always make sure the surface is clean and completely dry before sticking. The pad is designed for one-time use only. Please allow around 24 hours after application for the adhesive to fully set before use. Worry-free purchase—APPS2Car offers responsive and reliable customer support
- Strong Adhesion: Made with original 3M VHB GPH-160 double-sided adhesive pads (1.9" x 1.1", 0.06" thick), providing superior bonding strength—even in high-temperature environments. Stronger and more reliable than most standard adhesive pads
- Suitable for stick many kinds of material with flat hard surface. It can be used in home bathroom mirror, refrigerator, bed post, wall, locker, office, driving personnel and other related equipment replacement
- Rectangular 3M Vhb sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads. It is a strong sticky adhesive replacement for phone car mount. Compatible with Wizgear, Bextrix, Scosche ,Trainium ,PLDHPRO ,Ailun etc. magnetic phone car mount
- This 3M Vhb adhesive pad is high-temperature resistance and low-temperature resistance, water-proof, Tear off non-trace
Bestseller No. 4
volport Sticky Adhesive Replacement for Dashboard Suction Cup Mount, 80mm...
- [ Designed for Suction Cup Mount] Volport 3M round flat adhesive stickers fit for dashboard suction cup mount cradle,make your sucker stronger.It is also compatible with dash cam, GPS, car cell phone mount, iPad, tablet holder, soap dispenser, bathroom shower caddy / head /shelf /rod/, suction adhesive base/car clips, dashboard pad mounting disk, hook, towel rack/ring, rv, backup camera screen, hanging hooks, ect.You can also cut or trim the two sides sticky tabs to any smaller size you need.
- [ Genuine 3M Heat Resistant Tile Semi Permanent Sticky Adhesive Sheeting Disc Replacement ]The high temperature resistance performance of these suction cup adhesive back for dash cam mount/stainless steel holders/decorations/security camera/shower washcloth holder/towel bar/shower walls/motion sensor light/hanger/picture/hottub/kitchen/sink/glass doors/aluminum toilet paper holders reaches 120°C+，even on hot summer days in Texas,you can also use it safely, no more worries in cold weather, too.
- [ Very High Bond Stickiness ]: The adherence of these thin durable 2-sided circular waterproofing foam adhesive stickies parts pads is 40% stronger than the ordinary glue on the market. This 3M double face strength sticky part big adhesive backing dot is also waterproof. Multipurpose tearable tacky double sided gripping fixate anti gravity gel strips patches pad for roadster mobile phone carmount, furniture，tiles.
- [ Easy to Use ]: This large circle 2 sides refill adhesion tape replacement kit comes with sweepping padS to sweep the surfaces before applying. Just peel off the old adhesive stickly dots gel from mount and sweep the the surface first, when the surface is dried, tear off the 3m adhesive film to stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, then wait 24 HOURS to use.
- [ Package Includes ]: 4 x 3.15 inch wide (80mm diameter)3m heavy duty removable heat proof small double-stick sticky padded both side backed mat tape,1 x user guide. Need any help with our product, please feel free to contact us.
Bestseller No. 5
10 Pcs 3M Sticky Adhesive Pads for Car Magnetic Phone Holder, 1 inch Round VHB...
- Perfect Size for Magnetic Car Holder: Our 25mm (1 inch) 3m double sided sticky pad is suitable for various magnetic dashboard phone mount, universal magnet ball mount, micro finger ring holder, plastic wall socket grip, mini 2 &mini 3 dash cam camera base, compass car mount. Multipurpose strength heat resistant foam adhesive backing can seamlessly attach hands free or heavy duty car mounts to your car dash or windshield without cutting (Not fit for pop socket users!)
- High Temperature Resistant Adhesive: This small round 3m vhb adhesive replacement tape uses premium gule material that can work effectively in the hot summer of 120℃. Plus, the 2 sided stickers are 1.1 mm thick, which can maintain strong adhesion and never fall. Thickened heat resistant adhesive part can reduce the impact caused by bumpy road, sudden braking or sharp turn, and firmly fix the automobile bracket on the vehicle, uber, rv, truck, van, suv, pickup
- Extremely Durable & Residue-free: Our ultra-strong circle 3m two sided red adhesive dots is high bond stickiness and can handle the daily wear and tear of the car's interior environment. At the same time, this removable self adhesive accessory is quick to remove and clean. It can be easily removed when you want to change the cradle position without leaving sticky layer gel residue and without damaging the cell phone stand bottom and dashboard surface
- Easy to Use: This 3m replacement adhesive strips for magnetic car mount have friendly easy tear handle design makes installation convenient. Just peel off the protective film and stick the double-sided mounting tape to car mount base. Plus, 5 pieces auxiliary sticker kits included to help promote adhesion (Note: 1. Wait 48 HOURS after applying. The longer it is placed, the stronger it will adsorb! 2. If the film is difficult to strip off, press it back and try again)
- 10 Pcs for Long-term Use: Volport 10pcs 1 inch (25mm diameter) heavy-duty heat temp proof dashboard car holder adhesive replacement pads, ensuring that you can use them frequently for a long time. The multi-pack anti-slip 3m vhb adhesive sheeting discs to hold mobile devices mount securely on car window glass, windscreen, dash board or other smooth flat surface (Note: Not suitable for textured, leather or dirty dash surfaces)
Bestseller No. 6
6Pcs Double Sided Adhesive Tape Replacement for Dashboard Car Magnetic Mount,...
- Perfect for Magnetic Mounts and More: Each round adhesive pad measures 25mm (0.98 inches), precision-cut design ensures no trimming needed, perfectly fit most magnetic car mount with 3M adhesive on the market, and it can also firmly mount phone ring holder, mini dashcam, GPS device, or home accessories. These double sided adhesive pads hold strong and allowing your magnet mount to be firmly mounted without worrying about slipping or shifting
- Heat Resistant & Durable: Our magnet car mount adhesive backing is made of heat-resistant 3M VHB material, which can withstand high temperatures up to 126°C (248°F), whether you are in the hot summer or in a warm car, these strong tape pads will not melt, deform or lose grip, and can provide stable adhesion. Perfect for car interior or magnet holders and other devices used on windshields, dashboards in automotive environments
- Super Strong Adhesion: Lendouble upgraded 3m double-sided adhesive brings more excellent viscosity, both in terms of strength and durability, far exceeding ordinary glue, and can adhere firmly to smooth surfaces such as glass, plastic, metal, or textured dashboards. Also, using our included auxiliary stickers can further enhance the adhesion, say goodbye to shaking holder(Note: Use auxiliary stickers within 48 hours after installation
- Easy to Install & Residue-Free: With a user-friendly pull tab, this double sided sticky tape is easy to apply, just peel, press to apply your magnet car mount replacement adhesive in seconds. When it's time to replace, the adhesive tape peels off cleanly without leaving residue or damaging your dash. Perfect for car renters or meticulous drivers, this double-sided tape makes it easy to reposition your magnet car mount while value your dashboard
- Convenient 6Pcs, Reliable Support: You’ll receive 6 round strong adhesive tape discs and 2 auxiliary stickers—perfect for multiple uses in cars or around the house, saving time and money. Whether you're commuting daily or organizing your space, these double sided adhesive tape pads offer secure bonding. Backed by Lendouble—if your adhesive pads lose grip, we’ll send you a replacement, hassle-free
Bestseller No. 7
pop-tech 75mm Adhesive Pad Replacement for Suction Cup: 4Pcs 2.95'' Double Sided...
- Unique Air Hole Design: Our 75mm suction cup adhesive innovatively features a central air hole. Compared with ordinary fully enclosed adhesive pads, it reduces bubble formation, fully exploits the negative pressure adsorption principle of the suction cup, significantly enhances vacuum sealing performance, and doubles the adhesive strength. Even during bumpy drives, the car mount stays firmly in place, completely eliminating the hassle of frequent falls
- Precise Installation: The 2.95''/75 mm pop-tech car phone holder sticky pad doesn't need repeated manual alignment during installation. Just align central hole of sticky pad with suction cup for a precise fit, effectively preventing local air leakage caused by misalignment. Its self-adhesive layer can closely fill tiny uneven parts of the dashboard, assisting the suction cup in more thorough air exhaust, thus greatly enhancing the adsorption and grip of the mount
- Heat Resistance: This car phone mount adhesive replacement endures extreme temps -40°F to 248°F. Its central hole cushions thermal expansion and contraction, avoiding deformation. The 3-layer sticky adhesive gel solves all worries. UV-resistant layer defends against intense sunlight, protecting dash aging. Shock-absorbing foam soaks up drive vibrations, preventing phone slipping. High-performance sticky layer provides a powerful grip, ensuring holder adheres tightly to dashboard & windshield
- Super Strong Adhesion: Our car phone holder sticky pad replacement is made of 3M VHB heavy duty mounting tape. It gets stickier over time, providing long-lasting and stable adhesion for iphone suction auto cradles. Removing it leaves no residue, protecting your automotive dashboard and suctioncup base. The included auxiliary sticker can further strengthen the adhesion. Just fix it for 48 hours, and you can enjoy a reliable and firm usage experience
- Universal Compatibility: Our 3m circle adhesive double sided offers raised edge tabs for easy peeling. If you think the 75mm sticky adhesive for car mount is too large, cut it to any smaller size you want. Fits most suction cup devices, such as dashboard/windshield/window phone mount, magnetic/magnet/mag safe/vacuum/popsocket/wireless charger car mount, GPS vehicle holder, car cam dashcam, backup/action/reversing/rear view camera monitor stand, radar detector bracket, shower head holder, baby car camera
Bestseller No. 8
SkyTitan 4 Pack Sticky 17mm Ball Mount for Car Mount Adhesive Replacement...
- Upgraded Car Mount Sticker: SkyTitan adhesive car mount has a strong and residue-free sticky base, that will hold your phone steadily onto the dashboard. Optimal replacement mounting base for magnetic car phone mount, MagSafe car mount, car phone holder
- Standard 17 mm Ball Mount: SkyTitan stick-on car mount features a standard 17 mm ball joint that is compatible with a wide range of cell phone car mount. It is also an alternative to a cup holder mount, vent phone mount, suction cup holder, CD slot mount
- Various Viewing Angles: This mini car mount's incredibly flexible ball joint offers an endless range of viewing angles and quick transitions between landscape and vertical views
- Very Simple to Install: Select a sturdy and flat surface, thoroughly clean it, then allow it to dry. Place the car mount on the surface, apply pressure for more than 20 seconds, and wait 24 hours for it to solidify before holding the phone
- Note: Fixed nuts, phone holders, clamps, MagSafe mount, and magnets are not included. Included 4 pcs adhesive ball mount base, user manual. Not suitable for vinyl, cloth, leather, or wax-treated surfaces. Avoid putting your fingers on the adhesive pad
SaleBestseller No. 9
pop-tech Adhesive Pads Strip, 8Pcs 3M VHB Double-Sided Mounting Tape for...
- Perfect Fit for Dashboard Magnetic Phone Mount: 3M Vhb sticky adhesive strips for Car Mount, size:Rectangle: 1.9in*1.1in, designed for small magnetic car mounts, ensures a quick and easy installation for a perfect fit,custom-cut to reduce waste, easy to replace, stable and reliable use. Fit with various magnetic mounts,double-sided tape is the ideal choice for securely mounting on your car’s dashboard
- Heavy Duty Double Sided Adhesive Pads:size:48mm*28mm/1.9in*1.1in. Premium 3M Vhb-110 tape. 3M adhesive sticky pads with advanced bonding technology, offers 40% stronger adhesion than standard tapes. 3m adhesive replacement pads keeps devices secure on bumpy roads, ensuring stability during daily use or high-speed driving. Ideal for car mounts and other accessories, the 3M sticky works on smooth, hard surfaces like dashboards, windshields, countertops, refrigerators, walls, etc
- Strong Adhesion & Weather Resistant: The 3m strip pads replacement offers exceptional weather resistance, staying strong in both extreme heat and cold. Sticky pad replacement prevents slipping or detachment caused by harsh temperatures, ensuring your devices remain secure on the road. Durable and reliable, giving you peace of mind every time you drive
- Note：1. Ensure the surface is clean and dust-free before installation for optimal adhesion. 2. This mounting tape is single-use only, so confirm the position before applying. 3. Avoid touching the adhesive to maintain its stickiness. 4. Press firmly for 15 seconds to ensure a strong bond and full contact with the surface. 5. Suitable for smooth, hard surfaces like windshields, hard dashboards, or smooth tiles. Avoid textured, oily, or soft surfaces
- You’ll Get: 8 pcs high-quality 3M adhesive strips and 8 pcs cleaning wipes. Each adhesive strip provides strong adhesion for secure mounting, and the wipes help clean the surface for optimal contact. The 8 strips allow multiple uses, making it easy to reposition or replace. our customer service team is always ready to assist you for a hassle-free experience
SaleBestseller No. 10
volport 3M Sticky Adhesive Replacement Compatible with Socket Mount Base, 10...
- Phone Holder Adhesive Patch Backing: Red multi-use 8 PACK Smaller 2 sides VHB 3m replace sticky adhesive glue part works for hands free car dash holder, finger holder, phone ring holder, plastic mount, dashcam, ball mount, grip holder back & magnetic cell phone car mount base for applications. Tiny long-lasting adhesive replacement kit re-stick magnets wall mount & magnetic mount. With multiple adhesive strips cell phone holder, you position the android on a flat surface in the dashboard or van.
- Super Strong Circular 3M Sticky Adhesive Dots: Extra strong 2 PACK both sides larger adhesive replacement foam thin sheet work perfectly for collapsible grip & switchable tops socket. Withstand heat resistant on hot climate car mount replacement stickies parts, no need to buy re-stickable gps grip mount or dash cam. Heat resistant vhb 3M double sided adhesive sticky pads art for custom swappable expanding stand. Use heat tolerance adhesive pads sticky notes to reattach it.
- Replaceable Cleaning Pads Extra: Clean the chosen area to place your smartphone. Make sure the mounting surface and base of mount adhesive mat tags clear cleaned completely before attaching to affix and secure a new blanks 3M adhesive stickers backers for carmount or shower caddy or USB splitter even motorcycle helmet. For the ultra thin 2 sided 3M adhesive tapes dots, if you find the magnet phone holder cradle-less adhesion tabs 2-sided hard to be tearable, pls press it back and peel again.
- Easy to use: Just remove the used tacky double-sided tapes patch and removable thick 3M circle tape tab of car mount and clean up the mounting surface with cleaning pad until fully dry before installation, then restick to attach a new effective authentic permanent fixture and replacable 3M two way circles self adhesive sticky back film on the backs of flex grip mount and press firmly for 5 minutes front to back for better sticking to the bottom of auto car mount. Wait 24 hour to use after stuck.
- What You Get: Volport heavy duty two sided tape 8 piece 0.9 inch small 3M phone sticky adhesive patches gel top clip on for hanging as backup, extends the lifespan of magic mount and dash mount, simple strongest alternative 2 pcs large two sided 3M adhesive disc bulk reapply and hold for socket grips, addition 1 pair cleaning pads. 8 pack small sticky adhesive replacement is just designed for magnetic mounts and 2 pack big sticky adhesive replacement is just designed for the base of socket grip.
Before You Go
In summary, selecting the best adhesives for car phone mounts can significantly improve your driving experience. The right adhesive not only keeps your phone in place but also ensures safety on the road. Explore our list to find the perfect adhesive that meets your needs and preferences.
