10 Best Motorcycle Cup Holder [2025]
This post contains affiliate links. As an Amazon Associate, we earn from qualifying purchases.
Finding the best motorcycle cup holder can enhance your riding experience by allowing you to enjoy beverages on the go. With various options available, it’s essential to choose a holder that fits your bike and meets your needs. In this article, we will explore the top 10 motorcycle cup holders in the market, helping you make an informed decision.
Top 10 Motorcycle Cup Holder in the Market
Best Motorcycle Cup Holder Review
SaleBestseller No. 1
KEMIMOTO Motorcycle Cup Holder, Oxford Fabric Motorcycle Drink Holder with...
- Upgraded Alligator Clamp-Patented Design: Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles
- Easy to Install on 0.6"-1.5" Pole: The alligator clamp of this kayak cup holder fits 0.6"-1.5" diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design.
- 24oz Max Load Capacity: The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out. Not Compatible with Road King, Spyder RT, Burgman 400s.
- With Tightening Drawstring: The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your ride.
- Sturdy Fabric with 2 Separated Mesh Pockets: Be Made of 600D oxford fabric instead of other stainless steel or plastic holder, sturdy and washable. Don’t worry about rusty and broken after 2-3 months. 2 Mesh pockets to easily hold your little things.
SaleBestseller No. 2
KEMIMOTO ATV Cup Holder, Upgraded Motorcycle Drink Holder Handlebar, Water...
- 28oz Max Load Capacity: KEMIMOTO cup holder provides a higher load-bearing capacity. After testing, the maximum load-bearing capacity of the cup holder can reach 28oz. Don't worry about breaking or falling if your bottle weighs below 28oz. KEMIMOTO bottle holder could accommodate 12oz-28oz water cups
- Larger and Adjustable Holder Size 3.5In: The maximum adapted diameter of the motorcycle cup holder is 3.5 inches. The capacity of the motorcycle drink holder can be manually adjusted at the bottom. Flexible arms allow different-sized cups such as ordinary water cups, bottles,cans, travel mugs, beverages. Compatible with Stanley Contigo Nalgene water bottle
- Strong Metal Clamp and Crocodile Bite Design: Compared with other cup holders, the KEMIMOTO ATV drink holder is made of durable and sturdy metal material; the crocodile bite design of our cup holder can obtain a stronger grip, not easy to slip or vibrate. Meanwhile, 2 pieces of anti-skip pad gaskets will be provided to fit handlebars better
- Wide Compatibility 0.6”-1.56”: The mount range of the KEMIMOTO bike cup holder is 0.6 in-1.56 in. Suitable for different handlebars and different occasions, the KEMIMOTO water cup holder can fit most ATVs, motorcycles, bicycles, quads, boats, strollers, walkers, wheelchairs, scooters, and golf carts, compatible with Polaris Sportsman Scrambler Rancher, and so on four wheeler
- Anti-Break and Tough Material: Compared with the old style, the upgraded 4-wheeler cup holder is made of tougher, crack-proof, thicker PP material, not easy to crack. This holder grips hard enough not to bounce up and down, slide around, or fall off while going over rough terrain
Bestseller No. 3
LEXIN LX-C3 Motorcycle Cup Holder with 360°swivel ball-Mount, Large Boat Drink...
- Upgraded 360° Clamp Design: Experience enhanced stability with the upgraded LEXIN C3 motorcycle cup holder featuring a 360° clamp design. With 4 screws for increased strength, better load-bearing capacity, and a secure fit, you won't face issues of loosening or spinning. Two anti-skip pad gaskets are included to provide friction and ensure a snug fit on your handlebars, eliminating worries of falling or spinning during high-speed rides
- Versatile Fit 0.87"-1.25" Pole: The C3 motorcycle drink holder comes with two types of spacers, adaptable to handlebars/poles/bumpers with diameters ranging from 7/8" to 1 1/4". Compatible with various vehicles like motorcycles, Can-Am, ATVs, strollers, scooters, yachts, bicycles, boats, cruisers, canoes, golf carts, wheelchairs, and more
- Great Capacity: With an inner diameter of 2.17"-2.76" and a height of 4.92", this cup holder accommodates cups, cans, and bottles of different sizes. It comfortably fits standard even smaller water bottles, ensuring your drink is conveniently within reach without spillage
- Special “Gear” Basket: The LEXIN C3 cup holder features a special "gear" shape rubber sheet on top for a secure grip, preventing spills or falls while riding. An ideal gear for motorcycle riders, providing a sturdy and reliable cup-holding solution
- High-Caliber Durable Material: Crafted with an upgraded chrome aluminum mounting piece, the drink holder is more durable, lightweight, and washable compared to metal or plastic holders. Say goodbye to rust concerns. The bracket, made from strong, soft, and quick-drying material, cradles the cup gently without scratching, ensuring a dry and reliable hold after rainy days
SaleBestseller No. 4
Kewig Anti-Theft Motorcycle Cup Holder, Extra Large Adjustable Size Bike Water...
- Larger & Adjustable Width: Kewig motorcycle cup holder can accommodate cups with a diameter range of 50-90mm, 1.96-3.5", is easily to adjust the width of the kettle holder througth knob on the bottom, Whatever water bottles, coffee mugs, beer bottles, sports cups and other cup also can be accommodate
- Sturdy & Safe & Quality Material: Our motorcycle drink holder come with sturdy and durable clamps, built-in rubber anti-slip pads for a stronger grip will not slip or vibrate, Made of PA66+GF high-strength composite material, the internal structure contains aluminum alloy parts, and adopts an anti-spill and anti-falling design, which is strong and safe
- 32oz Maximun Load Capacity: Kewig bike cup holder provide higher carrying capacity. After tested the max weight: is 32oz, Don't worry about breaking or falling if your bottle weighs below 32oz, Our cup holder can be accommodate 12oz-32oz water cups
- Easy Intallation & 360° Rotation: This ATV cup holder is very easy to install, frist, find a place you want install on just need to make the clamp intall on cup holder main body on and then use clamp mount on, 360 degree rotation design even makes it compatible with different angles of handlebars, suitable for more scenarios
- Wide Compatibility: Kewig Bike water bottle holder with wide compatibility, large water bottles designed to fit diameter of 12-47mm/ 0.47-1.85" ATVs, motorcycles, bike, electric vehicles, scooters, strollers and golf carts, You can enjoy your favorite beverage while riding
SaleBestseller No. 5
Extra Large Motorcycle Cup Holder Anti Theft, Mathtoxyz Bike Water Bottle Holder...
- EXCELLENT LOAD-CARRYING CAPACITY: The upgraded Mathtoxyz cup holder provides a higher load capacity. Compared with other drink holders of the same type, we have greater load-bearing capacity (Tested weight: 40 oz). Don't worry about breaking or falling if your bottle weighs below 40oz.
- ANTI THEFT STRONG GRIP CLIP: The screw part has anti-theft design and can only be disassembled with specialized tools. The powerful bionic setting firmly secures the cup holder to the rod. Even on bumpy roads, the Mathtoxyz handlebar cup holder can be firmly fixed to the handlebars of motorcycles, bicycles, or scooters. It has an impressive and firm grip, won't slip, and firmly holds your drink and cup.
- QUICK ADJUSTMENT: Press and hold the ATV drink holder bottom button to quickly adjust the size (1.95 - 3.60 in.), after putting the bottle in, tighten the nut to complete the lock. The flexible arms of the motorcycle drink holder can accommodate various sizes of water bottles, coffee mugs, baby bottles, drink bottles, drink cups, and more.
- CRACK-RESISTANT MATERIAL: The motorcycle cup holder is made of crack-resistant material for extreme durability and toughness. The smooth surface of the handlebars of the bicycle cup holder prevents your bike from getting scratched
- WIDELY USED & Great Gift idea: The cup holder handlebar clip can be rotated 360 degrees so that it can be clipped anywhere on the bike. As long as the diameter of the handlebar is within the range of (0.5-1.57in. ), it can be applied. The handlebar cup holder is the best gift for Motorcycle and bicycle enthusiasts.
Bestseller No. 6
PSLER Motorcycle Drink Cup Holder Handlebar Mount Universal for Dyna Fat Bob...
- 【Installation dimensions】Drink Holder Perch Mount installed on left or right control.Two sizes of screws are provided to accommodate more models:6MM 1/4 British Standard Threads and 6mm International Standard Threads.One screw is used to install on h-arley,for all h-arley 1996-up models with clutch or brake perch mounts(2014-up Street 500 and Street 750 is NOT included).The other is used to install on H-onda,for Goldwing GL1800 2018-up(ONTY for DCT or CB switch installed on brake side of bikes).
- 【Other Applicable Models】Motorcycle Handlebar Cup Holder fits for F6B,Goldwing GL1500,VTX1300/1800,Valkyrie 2014-up,Shadow 750 Aero,Ace & Spirit,Shadow 1100,VT1300 Custom Line (Sabre, Stateline, Interstate),Rebel 300/500.For Road Star & Warrior,V Star,Venture,Bolt,Stryker,XSR 700/900,SCR900.For Vulcan 900,Vulcan 1500/1600 Including Mean Streak,Vulcan 2000. For Boulevard M/C50/C90/M109.For In-dian 2014-up all models.NOTE:please check the data of the screws for avoiding incompatibility problems.
- 【Design Features & Attention】The ball mounting design for Infinite adjustments and quick release.Four buckles are connected to the swivel to fix the ball,so that the ball can rotate freely inside.Loosen the swivel,pull out the ball on the handle from the buckle for quickly disassembling.Insert the ball into the middle of the buckles and tighten the swivel for quick installation.Please don't over-tighten the swivel to prevent the four buckles from cracking and falling.
- 【Material】The motorcycle cup holders handle is made of aluminum which makes your motorcycle water bottle holder more textured.Motorcycle cup holder handlebar mount is made of soft rubber lined ring which can avoid scratching the cup and prevent your bottles from vibrating for better stability.At the same time, motorcycle drink holders are resistant to high temperatures, whether it is your hot coffee or ice water, it can easily handle it.Goldwing drink holder makes your life more convenient.
- 【Package】1 x Motorcycle Drink Holder with Basket.When you encounter problems with your Road Glide drink holder, please contact our after-sales customer service in time and we will try our best to solve the problem for you.Our aim is to make the Road King motorcycle cup holder bring you convenience instead of trouble.Please feel free to order this Street Glide cup holder.
SaleBestseller No. 7
FODSPORTS Motorcycle ATV Cup Holder, Upgraded Motorcycle Drink Holder with...
- 【Compatible with Different Cup Sizes】FODSPORTS motorcycle drink holder is compatible with cups up to 3.6 inch in diameter, you can easily adjust it by the knob on the bottom of the cup holder to fit different cup sizes, the adjustment range is: 2.08''-3.6''. Suitable for such as water bottles, coffee mugs, beer bottles, sports cups, cups with handle, and more, and it is also Bluetooth compatible
- 【Heavy Duty Metal Clip & Quality Material】FODSPORTS motorcycle cup holder is made up of aluminum alloy and high quality TPE material, it's solid, durable and long-lasting. Heavy duty aluminum alloy metal clip design with built-in rubber anti-slip pads for a stronger grip while avoiding scratching the handlebars. The full wrap frame holds your cup tightly and won't bounce up and down and slide around or fall off while going over rough terrain
- 【32 oz Maximum Carrying Capacity】FODSPORTS motorcycle cup holder handlebar provide higher carrying capacity. After tested, the FODSPORTS motorcycle atv cup holder can reach a maximum carrying capacity of 32 oz. If your bottle weighs less than 32 ounces, please don't worry about breaking or dropping it. The FODSPORTS motorcycle water bottle holder can hold 12 oz-32 oz water glasses
- 【Wide Compatibility】FODSPORTS bike cup holder has wide compatibility, designed to be compatible with round tubing frames from 0.5" to 1.57" in diameter, and square tubing frames from 0.5" to 1.0". FODSPORTS bike water bottle holder can fit most all-terrain bikes, ATVs, motorcycles, bicycles, quads, boats, strollers, walkers, wheelchairs, scooters, golf carts, and more. And it also is a portable speaker stand
- 【Quick Installation & 360 Degree Rotation】This motorcycle cup holder is very easy to install, it takes less than 3 minutes to complete the installation. 360 degree rotation design even makes it compatible with different angles of handlebars, suitable for more scenarios. What's more, the package also comes with a free hex nut installation tool
Bestseller No. 8
LOKTENWO Anti-Theft Motorcycle Cup Holder, Extra Large Adjustable Size Bike...
- 【 Fit 1.95" - 3.6" Bottles】 Adjustable Size Design. The cup holder can fit larger, standard and smaller size water bottles. Fit max bottle diameter is 3.6"(90mm), the min bottle diameter is 1.95"(50mm). Flexible to accommodate various sizes of water bottles, coffee mugs, baby bottles, drink bottles, drink cups, and more.
- 【 Anti-Shake & Durable 】 Loosen the bottom knob to quickly adjust size and tighten to lock. The special surrounding structure of the bicycle water bottle holder will hold the bottles tightly, so there is no need to worry about it falling while riding. The main body is made of high-strength composite material PA66+GF, tear-proof, maximum load capacity up to 40 ounces.
- 【 Anti-Theft Protection 】Unlike other designs, the super clamp base of this atv cup holder has a special knob design. By locking the knob with a special wrench included in the set, this stroller cup holder cannot be easily disassembled with bare hands, providing additional anti-theft protection.
- 【 Anti-Slip Design 】 The Super Clamp mounting base has built-in Anti-slip TPU pads that provide a strong grip on rails from 0.5" (12.7mm) to 1.57" (40mm) in diameter. Even when riding on rough and bumpy roads outdoors, it can ensure that your motorcycle drink holder is safely and securely fixed on the handlebar or frame.
- 【Easy Installation & Adjustable Angle】 Installation and disassembly can be completed quickly with the tools provided with the set. This bicycle drink holder can be installed on the horizontal or vertical handlebars or bike frame, the installation direction can be adjusted.
Bestseller No. 9
Outdoor 360° Rotating Bike/Motorcycle Cup Holder - Auto-Lock, Foldable Design...
- 360° Rotation for Outdoor Adventures – Adjust your bottle to any angle during hiking, biking, or motorcycle trips. The auto-lock system prevents spills even on rugged trails, compatible with standard 2.2–3.5” bottles
- Ultra-Portable Foldable Design – Collapse the holder with one hand for compact storage in backpacks or gear bags. Ideal for campers and cyclists needing space-saving solutions
- All-Terrain Compatibility – Securely mounts on bicycles, motorcycles, ATVs, and hiking strollers. Adjustable clamps (0.67–1.18” poles) fit most handlebars and frames
- Weather-Resistant & Durable – Reinforced aluminum alloy withstands rain, dust, and extreme temperatures. Non-slip grip protects bottles from scratches during outdoor use
- Safety-First for Active Lifestyles – No tools needed for setup. Tested for stability on bumpy trails and high-speed rides, reducing distractions during adventures
Bestseller No. 10
RAM Mounts (RAM-B-132-400U) RAM MOUNTS Level Cup 16oz Drink Holder with RAM...
- The RAM-B-132-400U consists of the small Tough-Claw base and RAM Level Cup Self-Leveling Drink Holder; koozie is included
- The drink cup holder has two pivot points, allowing for your drink to always stay upright and never spill
- The compact design allows easy installation in a wide variety of applications including motorcycles, kayaks and boats, bicycles, wheelchairs, medical carts and more
- Compatible Drink Size: 12-16 oz; Compatible Drink Dimensions: 2.5" - 3.5" Diameter; Rail/Tube Clamp Range: 0.625" - 1.5" Diameter; Flat Surface Clamp Range: 0" - 1.14"
- Backed by a lifetime warranty
Last Word
In conclusion, selecting the best motorcycle cup holder can make your rides more enjoyable and convenient. By reviewing the top options available, you can find a holder that suits your style and preferences. Keep these choices in mind to ensure a smoother and more refreshing journey on your motorcycle.
